Honda 1990 Accord Coupe, Owner'S Manual, Page: 114 / 140

Changing a Flat Tire
Do not attempt to change a tire unless the car is on
firm, level ground and well out of the flow of traffic.
Park the car on a firm, level surface, apply the parking brake,
turn on the hazard warning switch and put the transmission in
gear, (Park for automatic).
1. Remove the cover.
2. Remove the jack.
NOTE: Turn the connector on the end of the jack counter-
clockwise to loosen it from its mount.
3. Remove the lug wrench/jack handle and jack handle exten-
sion from the tool bag.
4. Remove the spare tire.
5. Place blocks in front and back of the wheel diagonally op-
posite the tire you are changing.
6. Use the lug wrench to loosen the wheel lug nuts counter-
clockwise one-half turn. On the EX model, first remove the
center cap from the wheel by prying it out with the flat
screwdriver (not provided in the tool bag).
CAUTION: Hold the center cap with your hand then pry it off
using a rag to protect the cap and the wheel.
(cont'd)
CENTER CAP
SCREWDRIVER
COVER
JACK
TOOL BAG
COMPACT SPARE