Honda 08L04-S9V-100 Installation Instructions Download Page 1

© 2008 American Honda Motor Co., Inc. - All Rights Reserved.

AII 40273 (0808)

1 of 4

08L04-S9V-1000-91

INSTALLATION
INSTRUCTIONS

Accessory

Application

Publications No.

Issue Date

AUG 2008

2009 ODYSSEY

AII 40273

LUGGAGE BASKET

P/N 08L04-S9V-100

PARTS LIST

8 Bolts

2 Frames A

2 Frames B

9 Pipes

Flap

4 L-brackets

4 Bracket covers A

4 Bracket covers B

4 Brackets A

8 Screws

8 Self-tapping screws

8 Nuts

8 Washers

Hex wrench

4 Brackets B

8 Square nuts

8 Socket bolts

TOOLS REQUIRED

Phillips screwdriver

10 mm Combination wrench

INSTALLATION

NOTE:

Be careful not to damage the roof and finished
surfaces of the body when installing the luggage
basket.

Be careful before entering automatic car washes.
Check the vehicle height limit of the automatic car
wash and the height of the vehicle.

The  maximum load capacity for this product is
110 lb (50 kg); approximate product weight is
12 lb (5 kg).

Do not allow the combined weight of the accessory
and cargo to exceed the carrying capacity of the
roof rack.

A Honda roof rack or crossbars are required to
install the luggage basket.

Put this information in the glove box with the vehicle owner's manual.

8 Rubber pads

Summary of Contents for 08L04-S9V-100

Page 1: ... Phillips screwdriver 10 mm Combination wrench INSTALLATION NOTE Be careful not to damage the roof and finished surfaces of the body when installing the luggage basket Be careful before entering automatic car washes Check the vehicle height limit of the automatic car wash and the height of the vehicle The maximum load capacity for this product is 110 lb 50 kg approximate product weight is 12 lb 5 ...

Page 2: ...e A to frame B in the same way 4 Install L brackets on the other frame A 5 Attach frame A to frame B by sliding the L brackets into each frame B and installing one screw in each bracket 1 Insert the nine pipes into frame B Press down on the button on the end of each pipe and push the end into the hole in frame B Repeat on the other side FRAME B FRAME B PIPE FRAME B BUTTON PIPE FLAP FRAME A FRAME A...

Page 3: ...e brackets B as shown SQUARE NUT FRAME B 8 Position four bracket covers A over the corners then install four bracket covers B Install self tapping screws to secure the covers 10 Attach one bracket A to each bracket B Use two bolts two washers and two nuts for each bracket A Face the cutout in each bracket A to the outside Do not tighten the bolts yet FRAME A FRAME B BRACKET COVER A SELF TAPPING SC...

Page 4: ...1 Position the luggage basket on the roof rack with the flap on frame A facing forward Attach the basket to the crossbars by sliding bracket A around the crossbar and tightening the nuts Tighten the nuts evenly CROSSBAR FLAP Face forward LUGGAGE BASKET BRACKET A LUGGAGE BASKET ...

Reviews: