Honda 00X31-VL0-U540 Owner'S Manual Download Page 6

6

Installation

1. Raise the discharge guard and hook the grass bag onto the mower 

deck as shown.

2. Release the discharge guard to secure the grass bag.

Removal

1. Raise the rear 

discharge guard, 
grasp the grass bag 
handle and remove 
the grass bag.

2. Release the rear 

discharge guard.

3. When the grass bag 

is clear of the rear 
discharge guard, you 
can lift it through the 
handlebar opening, 
or you can remove it 
to the rear of the 
mower below the 
handlebar.

Smart Drive™ Control
(VKA) 

The Smart Drive control can be 
adjusted up or down into any 
one of five positions.

Slide the multi-position adjuster 
to the left to unlock the control, 
move the Smart Drive control 
up or down into the position 
most comfortable, and then 
release the multi-position 
adjuster and allow it to engage.

Do not attempt to adjust the position of the Smart Drive control while 
the mower is in motion.

OPERATION

SAFE OPERATING PRECAUTIONS

Before operating the mower for the first time, please review 

LAWN 

MOWER SAFETY

 (page 2). Even if you have operated other mowers, 

take time to become familiar with how this mower works and practice 
in a safe area until you build up your skills. For your safety, avoid 
starting or operating the engine in an enclosed area, such as a 
garage. Your mower’s exhaust contains poisonous carbon monoxide 
gas, which can collect rapidly in an enclosed area and cause illness or 
death.

STARTING THE ENGINE

The blade(s) turn when you pull the starter 
grip. It is easiest to start the engine in a 
clear or mowed area where the blade(s) 
can turn freely.

1. Turn the fuel valve to the ON position.

2. PDA, SDA: Move the throttle lever to 

the proper starting position.

COLD ENGINE:

Move the throttle lever to the CHOKE 
position.

WARM ENGINE:

Move the throttle lever to the FAST position.

VKA: This model has an automatic choke so there is no throttle 
lever.

3. SDA, VKA: Release the clutch lever or the Smart Drive control.

This will prevent the mower from moving forward when you 
operate the starter.

4. Pull back on the blade control lever and hold it against the 

handlebar. 

GRASS BAG 
HANDLE

REAR DISCHARGE 
GUARD

CONTROL

MULTI-POSITION 
ADJUSTER

SMART DRIVE 
CONTROL

ON

FUEL VALVE

CHOKE

FAST

(SDA)

(VKA)

BLADE CONTROL LEVER

Summary of Contents for 00X31-VL0-U540

























Reviews: