HONDA marine BF115J, Owner'S Manual

Page: 134 / 170

133
MAINTENANCE
<Replacement>
1. Remove the engine cover (see page
60).
2. Disconnect the 2-pin coupler (blue).
3. Remove the suspension strap from
the fuel filter with water separator
bracket, then remove the
suspension strap from the fuel filter
with water separator.
4. Bind the two fuel tubes with the
tube clips to prevent the fuel
leakage, disconnect the fuel tubes.
5. Remove the three screws holding the fuel
filter with water separator, delete the water
or deposit from the inside of the cup.
6. Thoroughly clean the cup, and
replace with a new fuel filter.
7. Reassemble the water separator in the
reverse order of removal. Use a new O-ring.
TIGHTENING TORQUE:
3.4 N·m (0.34 kgf·m, 2.5 lbs·ft)
WATER SEPARATOR CUP
SCREWS
O-RING (Replace)
2 PIN COUPLER
(BLUE)
FUEL HOSES
SUSPENSION
STRAP
WATER
SEPARATOR
HOSE CLIPS
32ZVT600.book 133 ページ ２０２１年１０月１５日 金曜日 午後４時９分