Homewerks Worldwide, LLC • Lake Bluff, IL 60044 • HomewerksWW.com
HANDS-FREE KITCHEN FAUCET
55-K821S-SS-T - Stainless steel finish
55-K821S-MB-T - Matte black finish
PACKAGE AND HARDWARE CONTENTS
PART
DESCRIPTION
QUANTITY
A
Faucet body
1
B
Optional deckplate
1
C
Optional gasket
1
D
Rubber washer
1
E
Lock nut
1
F
Metal washer
1
G
Hex bolt
2
H
Control box
1
I
Power connector
1
J
Weight
1
K
Soap dispenser
1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
• Protect your eyes with safety glasses when cutting or soldering water
supply lines.
CAUTION
• If you solder the joints during installation, the seats, cartridges, and washers
must be removed before using a flame or the warranty will be voided on
these parts.
• Cover the drain to avoid losing parts.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package and hardware contents list. If any part is missing or damaged,
do not attempt to assemble the product. Contact customer service for
replacement parts.
Estimated Assembly Time: 30 minutes
Tools required for assembly (not included): adjustable wrenches, groove joint
pliers, pipe wrench, Phillips screwdriver, and silicone.
Installation may vary depending on how the previous faucet was installed.
Supplies necessary for the installation of the faucet are not all included;
however, they are available wherever plumbing supplies are sold.
Prior to beginning installation, turn off the hot and cold water lines, then turn
on the old faucet to release built-up pressure. When installing the new faucet,
hand tighten the connector nuts.
DO NOT OVERTIGHTEN. Connections
that are too tight will reduce the integrity of the system.
Need Help? Please call our toll-free line at (877) 3
1
9-3757 (7:30 am to 4:30 pm CST) for additional assistance or service.
09-01-2020
A
D
F
G
B
C
J
I
H
K
E
