Homewardbath GH21-HT, Installation & Operation Manual, Page: 8 / 16

Choosing the proper location
Recommended locations for proper installation:
1. The steam box should not be located further than 15 feet away from the steam room.
2. The steam generator should not be installed inside the steam room.
3. The steam generator should not be installed outdoors or in any place that will influence the security of the
machine.
4. Do not install it in any places where the water might freeze.
5. Do not install near flammable objects or chemicals (coal, gas, etc.)
6. The steam generator should be installed in a dry and ventilated place.
7. If mounting machine to the wall: Make sure it is secured and is horizontally positioned.
8. On the other three sides, there has to be at least 6 inches of space left between steam generator and any other
object.
9. The place where the machine is installed must be accessible for cleaning and possible service work.
10. The steam generator should be in a close proximity to a drain for convenient Water Drain Valve hook-up.
11. After use, the steam pipe, safety valve, drain valve, water pipe, steam outlet is still very hot.
12. Place steam outlet minimum of 3ft away from bathers.
Attention : install an exhaust fan outside of the steam room so that it can expel any excess steam for proper
ventilation.
13. The shorter and straighter the steam lines, the more efficient they will be.
14. Avoid using 90-degree fitting. Use 45-degree bends to allow better steam flow.
15. The unit should be slightly higher than the steam outlet to allow condensation to drain out of the steam head.
16. The steam line must be insulated.
17. The 12kW generator requires the use of both steam outlets.
Keypad Diagram