background image

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/16” Drill Bit, 3/8” Drill Bit

IMPORTANT

Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.

Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Cartons 20 05530 0941, 0943 are also needed for assembly.

20 05530 0942

Storage Island

B.
Bottom

1 pc.

E.
Back Panel

1 pc.

F.
Shelf

6 pcs.

C.
Plinth

2 pcs.

D.
Back Panel

1 pc.

G.
Front Rail

4 pcs.

M4x25
Machine Screw

20 pcs.

Adjustable Pin

24 pcs. (+1 extra)

Cam Lock

30 pcs. (+4 extra)

M3.5x20
Wood Screw (short)

60 pcs. (+1 extra)

Knob (small)

8 pcs.

Knob (large)

12 pcs.

M  x

4 30

Wood Screw (long)

80 pcs. (+1 extra)

M  x25

4

Wood Screw

8 pcs. (+1 extra)

M6x25
Head Cap Bolt

20 pcs. (+1 extra)

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Cam Lock Screw

30 pcs. (+2 extra)

Summary of Contents for Storage Island 20 05530 0942













Reviews: