background image

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

88 5020 941

Kitchen Island

IMPORTANT

Cam Lock

15 pcs. (+2 extra)

Cam Lock Screw

15 pcs. (+1 extra)

1/2”
Round Head Screw

4 pcs. (+1 extra)

3/4”
Round Head Screw

8 pcs. (+1 extra)

1”
Round Head Screw

16 pcs. (+1 extra)

M6x35
Head Cap Bolt

20 pcs. (+1 extra)

Magnet

2 pcs.

M4x25
Machine Screw

4 pcs.

Knob

4 pcs.

Flat Washer

8 pcs. (+1 extra)

3/4”
Flat Head Screw

12 pcs. (+1 extra)

Adjustable Pin

16 pcs. (+1 extra)

Patent 8,584,600 B2

Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.

Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

B.

Side Panel

1 Pc.

C.

Side Panel

1 Pc.

D.

Middle Panel

1 Pc.

K.
Back Panel

2 Pcs.

L.
Back Piece

1 Pc.

E.
Front Rail

1 Pc.

F.
Front Rail

1 Pc.

G.
Back Rail

1 Pc.

H.
Back Rail

1 Pc.

I.

Shelf

4 Pcs.

M.
Door

1 Pc.

N.
Door

1 Pc.

J.
Bottom

1 Pc.

O.
Drawer

2 Pcs.

Refer to the last page(s) of these
instructions for drawer assembly.

Small Hex Wrench

1 pc.

Hex Wrench

1 pc.

Cartons 88 5020 942, 88 5008 943 or 88 5009 943 are also needed for assembly.

Tool(s) required for assembly:

Level

Phillips screwdriver,

Summary of Contents for Monarch Kitchen Island 88 5020 941










Reviews: