Head Cap Bolt
Spring Washer
Flat Washer
Assembly Instructions 2/3
STEP 1
Attach Legs (D) and (E) to Seat (A) with Flat Washers,
Spring Washers and Head Cap Bolts, tightening
bolts only halfway.
(See Figure 1)
Attach Front Stretcher (C) to unit with
Wood Screws. (See Figure 2)
Attach Side Stretchers (B) to Legs (D) and (E) with Wood Screws.
(See Figure 3)
Figure 1
Figure 2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Wood Screw
D
E
A
C
B
B
Wood Screw
Figure 3
