Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Key Wrench in a safe place as the bolts may need to be tightened up in the future.
Figure 1
A
STEP 1
Attach Seat (A) to Frame (B) with Round Flat Washers,
Spring Washers and Bolts, tightening the bolts
only half way. (See Figure 1)
Spring Washer
Round Flat Washer
Bolt
Spring Washer (large)
Flat Washer
Bolt (long)
Nut
Flat Washer
STEP 2
Attach Connector (C) to unit
with Nuts, Spring Washers (large),
Flat Washers and Bolts (long).
(See Figure 2)
Figure 2
B
C
