background image

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

88 5064 80

Chair

IMPORTANT

A.
Seat

1 pc.

Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.

Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Spring Washer

4 pcs. (+1 extra)

Small
Flat Washer

5 pcs. (+1 extra)

F.
Back Leg

1 pc.

B.
Front Leg

1 pc.

Small
Hex Wrench

1 pc.

M6x16
Head Cap Bolt

4 pcs. (+1 extra)

M6x60
Bolt (long)

2 pcs. (+1 extra)

Nut Cap

5 pcs. (+1 extra)

M6x40
Bolt

2 pcs. (+1 extra)

Hex Wrench

1 pc.

Key Wrench

1 pc.

Flat Washer

4 pcs. (+1 extra)

C.
Top Rail

1 pc.

D.
Side Rail

2 pcs.

E.
Back Rail

2 pcs.

M6x30
Flat Head Bolt

8 pcs. (+1 extra)

M6x13
Bolt (short)

3 pcs. (+1 extra)

Tool(s) required for assembly: Slotted screwdriver, Level

Summary of Contents for 88 5064 80

Page 1: ...nstructions to ensure a completed product as designed Do not use power tools above 8 volts to assemble Spring Washer 4 pcs 1 extra Small Flat Washer 5 pcs 1 extra F Back Leg 1 pc B Front Leg 1 pc Small Hex Wrench 1 pc M6x16 Head Cap Bolt 4 pcs 1 extra M6x60 Bolt long 2 pcs 1 extra Nut Cap 5 pcs 1 extra M6x40 Bolt 2 pcs 1 extra Hex Wrench 1 pc Key Wrench 1 pc Flat Washer 4 pcs 1 extra C Top Rail 1 ...

Page 2: ...n the future STEP 1 Attach Front Leg B to Seat A with Flat Washers Spring Washers Head Cap Bolts and Flat Head Bolt tightening the bolts only half way See Figures 1 and 2 Attach Side Rails D to unit with Flat Head Bolts tightening the bolts only half way See Figures 2 and 3 tightening the bolts only half way Attach Back Leg F to unit with Flat Head Bolts Tighten all bolts on this step Figure 2 Fig...

Page 3: ... Small Flat Washer Bolt Nut Cap Small Flat Washer Bolt short Bolt short STEP 3 Attach Back Rails E to back leg and seat with Bolts Bolts short Small Washers and Nut Caps bending Back Rails slightly to align the holes in the Back Rails to the holes in the back leg and seat See Figures 6 and 7 Tighten all bolts and nut caps used in Steps 2 and 3 STEP 4 To level the unit adjust the adjustable leveler...

Page 4: ...ADING with a soft cloth moistened in lukewarm soap and water Buff with a dry clean cloth CLEAN Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase Digital images of the defective parts may be required If the product was not purchased from an authorized retail affiliate Home Styles is under no obligation to provide replacement par...

Reviews: