Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach
s (B) to
( ) with Head Cap Bolts, Spring Washers and Flat Washers,
Side Frame
Top A
tightening bolts only halfway. (See Figure 1)
Tighten all bolts.
Figure 1
Head Cap Bolt
Spring Washer
Flat Washer
B
A
B
