Homestyles 5053-106 Assembly Instruction Manual Download Page 1

Page: 1 / 7

Part List

5053-106

Over the Commode Stand

IMPORTANT

Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.

Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

A.
Top

1 pc.

B.
Shelf

2 pcs.

C.
Shelf

1 pc.

D.
Side Frame

1 pc.

E.
Side Frame

1 pc.

F.
Side Frame

1 pc.

G.
Side Frame

1 pc.

H.
Front Rail

2 pcs.

I.
Back Rail

2 pcs.

Hardware List

Anchor

2 pcs. (+1 extra)

Bracket

2 pcs. (+1 extra)

Tool(s) required for assembly: Phillips screwdriver, Level, Pencil, Drill (8 volts or less), 3/8” Drill Bit

M3.5x40
Wall Screw

2 pcs. (+1 extra)

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

M6x16
Head Cap Bolt

32 pcs. (+1 extra)

Spring Washer

32 pcs. (+1 extra)

Flat Washer

24 pcs. (+1 extra)

Flat Washer (large)

8 pcs. (+1 extra)

Adjustable Pin

8 pcs. (+1 extra)

styles Customer Service: www.homestylesfurniture.com,

home

[email protected],

888-680-7460

Summary of Contents for 5053-106








Search results

Summary of Contents for 5053-106

Reviews:

Related manuals for 5053-106

Brands by name

Popular brands

Homestyles 5053-106, Assembly Instruction Manual

Search results

Summary of Contents for 5053-106

Reviews:

Related manuals for 5053-106

Brands by name

Popular brands