Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
Figure 2
Head Cap Bolt (short)
Head Cap Bolt (short)
STEP 1
Attach Back Rail (E1) to Side Panel (B)
with Head Cap Bolt (short).
(See Figure 1)
Attach Back Uprights (F) and (G)
to unit.
Slide Back Panels (H) into position.
Attach Back Rail (E2) to unit with
Head Cap Bolt (short).
STEP 2
Attach Front Rail ( ) to unit with Head Cap Bolt (short).
I
Attach Divider (K) to unit with Cross Dowel and
Head Cap Bolt (long). (See Figure 2)
Attach Front Rail (J) to unit with
Head Cap Bolt (short).
G
G
F
H
H
H
H
E1
E2
B
K
J
I
Head Cap Bolt (long)
Cross Dowel
