Assembly Instructions 3/3
D
D
Figure 4
Figure 3
STEP 3
Place Top (A) upside down on a soft cloth.
Attach leg unit to Top (A) with Flat Washers, Spring Washers and Head Cap Bolts,
tightening bolts only halfway. (See Figure 2)
Insert Stretcher (C) into hole in leg unit.
Attach leg unit to unit with Flat Washers, Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
Tighten all bolts used in this step.
C
A
Head Cap Bolt
Spring Washer
Flat Washer
Figure 2
STEP 4
Turn unit over to its’ upright position.
Insert Pegs (D) into holes in stretcher until snug. (See Figure 3)
Level unit by adjusting the adjustable levelers on bottom of legs.
(See Figure 4)
