background image

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

20 05503 0009

Entertainment Stand

IMPORTANT

Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.

Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

A.
Top

1 pc.

B.
Shelf

1 pc.

E.
Side Panel

1 pc.

F.
Middle Panel

1 pc.

K.
Back Panel

2 pcs.

N.
Foot

4 pcs.

H.
Door

1 pc.

J.
Shelf

2 pcs.

G.
Back Panel

1 pc.

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Adjustable Pin

8 pcs. (+1 extra)

M4x25
Machine Screw

2 pcs.

M3x15
Wood Screw

4 pcs. (+1 extra)

Magnet

2 pcs.

D.
Side Panel

1 pc.

I.
Door

1 pc.

M6x32
Head Cap Bolt

8 pcs. (+1 extra)

Cam Lock

8 pcs. (+2 extra)

Cam Lock Screw

8 pcs. (+1 extra)

Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit

Spring Washer

8 pcs.(+1 extra)

Flat Washer

8 pcs.(+1 extra)

Knob

2 pcs.

C.
Base

1 pc.

Summary of Contents for 20 05503 0009







Reviews: