Assembly Instructions 2/3
Figure 1
Figure 2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Open zipper at bottom of Seat (A), remove Feet (C) and (F),
then close zipper. (See Figure 1)
Attach Feet (C) to Seat (A) with Head Cap Bolts. (See Figure 2)
Insert Foot (F) into pre-drilled hole in unit, then tighten.
(See Figure 3)
Figure 3
STEP 2
Turn unit to its’ upright position.
Attach Back (B) to unit..
C
C
A
C
C
Zipper
F
B
Head Cap Bolt