Assembly Instructions 2/9
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
I
J
L
L
G
STEP 1
Attach Frame (I) and Rails (L) to Side Frame (J) with Head Cap Bolts (short), Spring Washers and
Flat Washers,
tightening bolts only halfway.
Tighten all bolts.
(See Figure 1)
Attach Base (G) to unit with Head Cap Bolts (short), Spring Washers and Flat Washers (large),
tightening bolts only halfway.
Tighten all bolts.
(See Figure 2)
Figure 1
Figure 2
Head Cap Bolt (short)
Spring Washer
Flat Washer (large)
Flat Washer
Spring Washer
Head Cap Bolt (short)
