Assembly Instructions 2/8
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
A
B
Figure 1
Cam Lock Screw
F
I
J
J
H
STEP 1
Insert Cam Lock Screws into pre-drilled holes
in Side Panels (A) and (B). (See Figure 1)
STEP 2
Attach Back Stretcher (F) to Side Panel (A) with
Cam Lock. (See Figure 2)
Attach Back Upright (H) to Back Stretcher (F).
Slide Back Panels (J) into place.
Attach Back Stretcher (I) to unit with
Cam Lock.
A
Cam Lock Screw
Cam Lock
Cam Lock
Figure 2
