63
Operating modes and configuration
6
Operating modes and configuration
After teaching-in and mounting the device, you can in-
dividually adjust the settings to your personal needs via
the configuration menu. To do this, proceed as follows:
• Press and hold down the control wheel
(E)
to
open the configuration menu.
• Select the desired symbol by turning the control
wheel and pressing it briefly if you want to adjust
the settings of the following menu items.
Press and hold down the control wheel to get
back to the previous level. The menu automati-
cally closes without applying changes if there is
no operation for more than 1 minute.
6.1
Automatic mode
6.2
Manual operation
6.3
Holiday mode
6.4
Operating lock
6.5
Programming of heating profiles
6.6
Date and time
6.7
Offset temperature
6.8
Selecting the desired temperature
display
6.9
Configuring the floor heating actuator
6.10
Communication test
