57
Configuration menu
time, no other operation is possible. After the adapting run
has been successful, the display returns back to normal.
If the adapter run has been initiated prior to
mounting or if an error message (F1, F2, F3) is
displayed, press the menu/boost button
(G)
and
the motor reverses to the “InS” position.
6
Configuration menu
When using the radiator thermostat without
Homematic IP Access Point, you can select the following
modes via the configuration menu after set-up directly
on the device and adjust the settings to your personal
needs. To do this, proceed as follows:
• By pressing and holding the menu button
(G)
, you
will be entering the configuration menu.
• Select the desired icon via the plus and minus
buttons
(E
+ F)
by pressing the menu button
briefly to change the settings of the different
menu items.
Press and hold down the control wheel to get
back to the previous level. The menu
automatically closes without applying changes if
there is no operation for more than 1 minute.
Summary of Contents for HmIP-eTRV-B
