47
Restore factory settings
8
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the device, please pro-
ceed as follows:
• Open the battery compartment
(D)
by removing
the cover
(B)
(s. figure 12)
.
Note: The cover can be removed easily if the key
is not in the neutral position.
• Remove the old battery.
• Insert the fresh battery making sure that it is right
way around while pressing the system button
(E)
at the same time. Press and hold down the sys-
tem button until the device LED
(E)
starts to flash
quickly orange
(s. figure 13
).
• Release the system button briefly and then press
and hold the system button again until the orange
flashing changes to a green light
(s. figure 14)
.
• Release the system button to finish the proce-
dure. The device will perform a restart.
Summary of Contents for HmIP-DLS
