68
Operating modes and configuration
6.6
Programming the week profiles
You can use this menu item for configuring heating and
cooling profiles and to adjust the week profiles according
to your personal needs.
• Press and hold down the control wheel (
E
) to
open the configuration menu (
see fig. 6
).
• Select the
symbol by turning the control
wheel and confirm by pressing the control wheel
briefly.
• Turn the control wheel and select
-
“type” for switching between heating (”HEAT”)
or cooling (”COOL”),
-
“Pr.nr” to set the week profile number (”no. 1,
no. 2 ... no. 6”),
-
“Pr.Ad” for individual settings of the week pro-
file and
-
“OSSF” for activating (”On”) or deactivating
(”OFF”) the optimum start/stop function.
6.6.1 Heating or cooling
You can use your floor heating system to heat rooms dur-
ing winter or to cool rooms during summer.
• Select “HEAT” for heating and “COOL” for cool-
ing in the menu item “type” by turning the con-
trol wheel (
E
) and confirm by pressing the control
wheel briefly.
