34
35
Hazard information
Hazard information
2 Hazard information
We do not assume any liability for damage to
property or personal injury caused by improper
use or the failure to observe the safety
instructions. In such cases, any claim under
warranty is extinguished! For consequential
damages, we assume no liability!
Especially observe the safety and handling
instructions in the chapters “Installation” and
“Start-up”!
Do not open the device. It does not contain any
parts that can be maintained by the user. There
is a risk of electric shock if the device is
opened. In the event of an error, please have
the device checked by an expert.
Do not use the device if there are signs of
damage to the housing or connecting sockets,
for example, or if it demonstrates a malfunction.
If you have any doubts, please have the device
checked by an expert.
For safety and licensing reasons (CE),
unauthorized change and/or modification of the
device is not permitted.
The device may only be operated in dry and
dust-free environment and must be protected
from the effects of moisture, vibrations, solar or
other methods of heat radiation, cold and
mechanical loads.
The device is not a toy; do not allow children to
play with it. Do not leave packaging material
lying around. Plastic films/bags, pieces of
polystyrene, etc. can be dangerous in the
hands of a child.
The device described is part of a building
installation. When planning and setting up
electrical installations, the standards and guide-
lines which are applicable in the country in
which the equipment is installed must be
complied with. The device has been designed
solely for operation on a 230 V/50 Hz AC
supply. Only qualified electricians (to VDE
0100) are permitted to carry out work on the
230V mains. Applicable accident prevention