HoMedics SDN-4000ATNDY Manual Download Page 4

GB

DEMO BUTTON 

 - For a brief demonstration of the features 

of the Shiatsu Massaging Cushion, press the Demo button. 

The unit will briefly go through each function. Once complete, 

the unit automatically turns off. The L.E.D. light will blink to 

indicate the active functions.

SHIATSU GEL MASSAGE - 

A deeply relaxing and rejuvenating 

experience invented in Japan using rhythmic finger pressure to 

stimulate ‘chi’ (vital energy), relieving stress and tension.

SHIATSU PROGRAMS 

 - 

Choose from 3 preset 

programs where the Shiatsu massage travels up and down in 

a specific area of the back. To select a program, simply press 

the button and the LED will illuminate. To deselect, press the 

button again or press another button.

 

Full back 

Upper back 

Lower back

SPOT SHIATSU   - 

While the unit is in Shiatsu massage, 

press either button to stop and focus the Shiatsu action in one 

place. Once the unit is operating in Spot Shiatsu, you may 

adjust the mechanism position by holding 

down either button until the desired position 

is reached. The Up Arrow will move the 

mechanism upwards and the Down Arrow will 

move it down. Once you release the button, the 

mechanism will stop in that place.

3-SPEED SETTING

 - To change the speed 

of the massage mechansim press ‘3 Speed’ 

button to change between low, medium and 

high. The speed setting selected is shown by 

the lights below.

POWER BUTTON 

q

 - 

To turn on the unit, 

first press the POWER button. The LED indicator 

will illuminate and confirm your selection. 

To turn off the unit, simply press the button again. The LED 

indicator will blink while the back massage mechanism returns 

to its lowest point and then it will turn off.

VIBRATION MASSAGE 

 - Add invigorating vibration 

massage to any shiatsu or rolling massage program.

PERFECT FIT 

 - To customize the massage to your height, 

press the “Perfect Fit” button at the highest desired position. 

The massage heads will not travel higher than that position for 

the duration of the massage. To deselect the Perfect Fit feature, 

press the “Perfect Fit” button a second time. The massage will 

return to its full travel.

ROLLING MASSAGE 

- Rolling is like two hands or thumbs 

working up and down your back.

ROLLING PROGRAMS   

- Choose from 3 preset programs 

where the Rolling massage travels up and down in a specific 

area of the back. To select a program, simply press the button 

and the LED will illuminate. To deselect, press

the button again or press another button.

WIDTH ADJUSTMENT 

 - 

While the 

unit is in Rolling massage for the back, press 

this button to adjust the distance or width 

between the massage heads. With each press, 

the massage heads will move to the next 

available position.

GENTLE HEAT   - 

For gentle soothing heat 

when massage is on, simply press the gentle 

heat button and the corresponding red L.E.D. 

light will illuminate. To deselect, press the 

button again and the corresponding L.E.D. 

light will turn off.  

For your safety, gentle heat cannot be 

turned on if massage is not selected.

INSTRUCTIONS FOR USE:

IMPORTANT - Preparing the appliance for use

The Shiatsu Massager comes with a screw located on the back of the unit to 

protect the massage mechanism during shipment, which must be removed 

before the first use to allow the shiatsu feature to function. Use the

provided Allen key. Then, properly dispose of the screw.

WARNING – Failure to remove screw may cause permanent 

damage to the appliance.

Error:

 all remote control LEDS flash for a few seconds.

Cause:

 massager overloaded.

Solution:

 ensure the allen key bolt/screw has been removed from back of 

the massage cushion (using the allen key included). Should the condition 

continue after this please contact your HoMedics service centre.

Strapping System

The Gel Shiatsu Massager incorporates a unique strapping system which 

allows you to fasten it to almost any chair. Just slip the straps over the seat 

or chair and adjust fastening straps to secure. Your massager won’t slip or 

slide away.

Note: 

Do not use this product for more than 15 mins at a time.

The moving dual massage mechanism on the back always “parks” or 

finishes in its lowest position. It will continue to this position after the 

power has been turned off. If the electrical supply is interrupted, when 

power is restored, the mechanism will “park” or move to its lowest position.

Using essential oils  

with the aroma tab

Gently pour a few 

drops of oil onto the aroma 

tab, releasing the scent in 

the air. The more drops,  

the stronger the scent.

MAINTENANCE:

Cleaning

Unplug the appliance and allow to cool before cleaning. Clean only with a 

soft, slightly damp sponge.

•   Never allow water or any other liquids to come into contact with the 

appliance.

•  Do not immerse in any liquid to clean.

•  Never use abrasive cleaners, brushes, glass / furniture polish, paint 

thinner etc to clean.

Storage

Place the appliance in its box or in a safe, dry, cool place. Avoid contact 

with sharp edges or pointed objects which might cut or puncture the 

fabric surface. To avoid breakage, DO NOT wrap the power cord around the 

appliance. DO NOT hang the unit by the cord. 

PRODUCT FEATURES  Unique Gel nodes provide a smooth, natural touch massage

Moving Gel Shiatsu 

massage mechanism

IB-SDN4000ATNDY-0320-01

FKA Brands Ltd

Somerhill Business Park, Tonbridge, Kent TN11 0GP, UK

Customer Support: +44(0) 1732 378557 | [email protected]

Aroma tab

Reviews: