Home HME030236N, Manual

Page: 11 / 16

11
CLEANING AND MAINTENANCE
To avoid an accident, cut off the power supply before cleaning according to the following instructions. The cleaning
must be under the guidance of professional staff.
Cleaning:
We suggest that you contact professional cleaning service for cleaning.
CAUTION: This unit dispenses water at temperatures that can cause severe burns. Avoid direct contact with hot
water. Keep children and pets away from the unit while dispensing.
Sanitizing:
The unit was sanitized before leaving the factory. It should be sanitized every three months with a disinfectant
purchased separately. Follow the instructions on the disinfectant and then clean it with water.
Removing mineral deposits:
Mix 4 liters of water with 200g citric acid crystals, inject the mixture into the machine and make sure the water
can flow out of the hot water tap. Switch on the power and heat it about 10 minutes. 30 minutes later, drain off
the liquid and clean it with water two or three times. Generally, this should be done every six months. To avoid
damage and potential danger, never disassemble this dispenser by yourself.
WARNING!
Failure to install the appliance according to instructions could be hazardous and may result in injury.
The packaging material used is recyclable. We recommend that you separate plastic, paper, and cardboard and
give them to recycling companies. To help preserve the environment, the refrigerant used in this product is R134a
(Hydrofluorocarbon - HFC), which does not affect the ozone layer and has little impact on the greenhouse effect.