Home electric T Series User'S Installation And Operation Manual Download

Page: 11 / 68

Page 11

3 Basic

Basic

Basic operation

operation

Note: The button in gray display indicates nonsupport.

3.1

3.1 Turn

Turn

Turn on

Plug the power supply and turn on the power supply switch. Power supply indicator light shining

indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video

output is multiple-window output mode. If the startup time is within the video setting time, the timing video

recording function will start up automatically. Then the video indicator light of corresponding channel is

shining and the DVR is working normally.

Note:

1. Make sure that the input voltage corresponds with the switch of the DVR power supply.

2. Power supply demands: 220V±10% /50Hz.

Suggest using the UPS to protect the power supply under allowable conditions.

3.2

3.2 Turn

Turn

Turn off

off

There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn

off the system] option is called soft switch. Pressing the power supply switch is called hard switch.

Illumination:

、

Auto resume after power failure

If the DVR is shut down abnormally, it can automatically backup video and resume previous

working status after power failure.

、

Replace the hard disk

Before replacing the hard disk, the power supply switch in the real panel must be turned off.

、

Replace the battery

Before replacing the battery, the setting information must be saved and the power supply switch

in the real panel must be turned off. The DVR uses button battery. The system time must be checked

regularly. If the time is not correct you must replace the battery, we recommend replacing the battery

every year and using the same battery type.

Note:

Note: The

The

The setting

setting

setting information

information

information must

must

must be

be saved

saved

saved before

before

before replacing

replacing

replacing the

the

the battery

battery

battery otherwise

otherwise

otherwise information

information

Summary of Contents for T Series





































































Search results

Summary of Contents for T Series

Reviews:

Related manuals for T Series

Brands by name

Popular brands

Home electric T Series, User'S Installation And Operation Manual

Search results

Summary of Contents for T Series

Reviews:

Related manuals for T Series

Brands by name

Popular brands