6
Operation
Care and Cleaning
Troubleshooting
The bulb will not light.
Problem
Possible Cause
Solution
The power is off.
Ensure the power supply is On.
Check the wiring.
There is a faulty wire connection.
Ensure the circuit breaker is in the On position.
The circuit breaker is off.
Check the wire connections.
The fuse blows or circuit
breaker trips when the
light is turned on.
There are crossed wires or the
power wire is grounding out.
Contact a qualified electrician or call the Customer Service Team at
1-800-986-3460.
Operation
Care and Cleaning
Troubleshooting
1
Turning the light on
Turn the light switch on to activate the fixture.
If it is daylight, the fixture will not illuminate. To test the
fixture, cover the photocell with electrical tape. Once you
confirm the fixture illuminates, remove the electrical tape.
If it is daylight, the fixture may not illuminate with the
electrical tape over the photocell, as the photocell can be
sensitive. Wait until nighttime to confirm the fixture
illuminates.
Clean the lamp with a soft, dry cloth.
Do not use any cleaners with chemicals, solvents, or harsh abrasives.
