7
Assembly - Standard Ceiling Mount
Preparing for routing the wires
Routing the wires and assembling
the fan
□
□
Insert the ball/downrod (B) through the canopy (C) and
and canopy ring (D) and slide the decorative motor collar
cover (E) onto the end of the ball/downrod (B). Make sure
the slots on the canopy (C) are on top.
Route the wires exiting the top of the fan motor
assembly (F) through the downrod as shown.
Carefully insert the hanger pin (GG) through the holes in the
collar (M) and downrod (B). Be careful not to jam the hanger
pin (HH) against the wiring inside the downrod (B).
Insert the locking pin (HH) through the hole near the end of
the hanger pin (GG) until it snaps into its locked position.
Reinstall the setscrew (II) turning clockwise until tight.---
□
□
Remove the hitch pin (GG) and lock pin (HH) from the
downrod (B).
Loosen the two set screws (II) from the fan motor assembly
(F) coupling.
2
1
WARNING: Failure to properly install the locking pin could
result in the fan becoming loose and possibly falling.
□
□
□
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(DD) must be completely tightened
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
