12
Assembly - Installing the Light Kit
Attaching the glass bowl
10
11
□
Loosen the three screws (LL) on the switch cup cover of the
light kit fitter assembly.
□
Connect the wires from the light kit fitter assembly (G) to the
wires from the switch cup of the fan motor assembly by
connecting the molded adaptor plugs together (blue to blue,
orange to orange). Carefully tuck all wires and splices in the
switch cup.
Align the three screws (LL) on the switch cup cover of the light
kit fitter assembly with the three key slots in the switch cup.
Position the light kit fitter assembly on the switch cup
and turn it clockwise until it locks. Tighten the three screws
(LL) that were loosened in first step to secure the light kit fitter
assembly (G).
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
□
□
light fixture.
Attaching the light kit fitter assembly
□
by screwing into the light bulb sockets.
CAUTION: Over lamping the fan will result in the fan lights
shutting down until the proper wattage of bulbs are installed.
Reset the lights by turning off the light and replacing the bulbs
with the correct wattage bulbs.
With the power, install the 4 LED bulbs (L)(5W,provided)
Remove the compressing ring (KK) from the threaded socket of
the light kit by turning the compressing ring counter-clockwise
until it unlocks.
□
Insert the glass shade(K) into the light kit cowling and turn the
compressing ring (KK) clockwise to tighten and secure the
glass shade. Repeat for the remaining shades.
