LEG 1 Pcs
TOP 1 Pcs
Step - 01 : Place the table top (A) upside down on a clean surface.
Step - 03 Use allen key (H) to tighten the metal angle (K) with pen
head allen bolt (I) and washer (J). Do not fully tighten. Use a screw
driver to tighten metal angle (K) to the leg (B) with wooden screw
(G). Once completed, tighten allen bolt (I) fully.
Step -02 Insert the leg (B) into the coordinating slots in the table
frame of top (A). Align the holes in the leg and the frame of top (A).
Insert allen bolts (D) with washers (E) and tighten every allen bolt
(D) with provided allen key (F).
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect
finish, avoid the use of chemicals and household cleaners. All hot serving dishes should be placed on a pad. Any liquid
spilled onto the furniture should be cleaned up immediately with a damp cloth.
BOTTOM BASE
1 Pcs
(A)
(K)
