background image

Pre-Assembly

Package Contents

Part                        Description                                Quantity

A                             Tree top                                          1
B                     Tree center, sticker 3                          1
C                     Tree center, sticker 2                          1
D                   Tree bottom, sticker 1                          1
E                            Tree stand                                        1

Christmas Tree

Model: TG90M3BB7L02

Sku # 1001 625 739

TM

Assembling the tree stand

Assembly

Step 1. Choose a location near a wall outlet. 
Step 2. Unfold the legs of the tree stand (E) and lay the stand on                 

                the floor. 
Step 3. Slide the locking disk of the tree stand (E) down until it 

                snaps into place. 

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a. 

READ AND FOLLOW ALL 

   SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should always 
be followed, including the following:

b.  Do not use seasonal products outdoors unless marked suitable for 

indoor and outdoor use. When products are used in outdoor 
applications, connect the product to a Ground Fault Circuit 
Interrupting (GFCI) outlet. If one is not provided, contact a qualified 
electrician for proper installation.

c.  This seasonal product is not intended for permanent installation or use.
d.  Do not mount or place the product near gas or electric heaters, 

fireplaces, candles, or other similar sources of   heat.

e.  Do not secure the wiring of the product with staples or nails, or place 

on sharp hooks or nails.

f.   Do not let lamps rest on the supply cord or on any wire.
g.  Unplug the product when leaving the house, when retiring for the 

night, or if left unattended.

h.  This is an electric product and not a toy! To avoid risk of fire, burns, 

personal injury and electric shock it should not be played with or 
placed where small children can reach it.

i.   Do not use this product for other than its intended use.
j.   Do not hang ornaments or other objects from cord, wire, or light string.
k.  Do not close doors or windows on the product or extensions cords as 

this may damage the wire insulation.

l.   Do not cover the product with cloth, paper, or any materi al that is not 
      a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not twist lamps.
n.  Read and follow all instructions that are on the product or provide with 

the product.

o.  

SAVE THESE INSTRUCTIONS

NEED HELP?

DO NOT RETURN TO STORE. Call: 1-877-527-0313 

Form 8am to 5pm EST, Monday through Friday.

Align both arrows 

in a straight line 

before sliding 

down to insert

Open the

cap cover

Do Not Tamper 

Internal Parts

Adapter

To Be Plugged

Into Wall

Outlet

Foot Pedal

on/off Switch

This tree  assmebles with Quick Set

®

 technology ---Set up and 

light up your tree in less than 10 minutes!
Step 1. 
Remove the protective caps from the tree bottom and 

                insert the pole into the tree  stand. 
Step 2. Remove the protective caps from the tree center and 

                insert the pole into the tree bottom. 
Step 3. Insert the tree top into the tree center. 
Step 4. Shape the branches to your preference by working from the 

                bottom to the top. When adjusting branches, ensure that all 

                wires are free of branch hinges.  
Step 5. Inplug the adapter into the wall outlet. All your lights should    

                now be lit.
Step 6.

 

Shape the tree from the bottom to the top. Start with the     

               branches farthest from the pole – fan out in a star shape, 

               and continue until the entire tree is shaped.

Step 7. When finished shaping the branches, slightly upsweep all 

                branch tips for a uniform look.  

Assembling the tree

Top view

Side view

Tree top

Sticker 3

Sticker 1 

Sticker 2

50S

100S

100S

50S

100S

50S

100S

Reviews: