background image

Christmas Tree

Model: TG76P4817D07

Sku # 1002 469 140

Step 1

. Choose a location near a wall outlet.

Step 2

. Unfold the legs and lay the stand in a flat area. Then slide the 

               locking disc downward and snap into place. 

Step 3

. When inserting the bottom section of the tree into the assembled 

               stand, thread the eyebolt into the stand and tighten until the pole 
               is firmly secured.

    Assembling the tree
    This tree assmebles with Quick Set® technology
    ---Set up and light up your tree in less than 10 minutes!

Step 1

. Remove the protective caps from the tree bottom 

                    and insert the pole into the tree stand.

Step 2

. Continue by inserting the upper tree section(s) to

                    the lower section(s) until inserting the tree top.

Step 3

. Shape the branches to your preference by working

                    from the bottom to the top. When adjusting branches,

                     ensure that all wires are free of branch hinges.

     

Step 4. 

Insert the adaptor into the wall outlet. All your lights 

                    should now be lit.

Step 5

. Shape the tree from the bottom to the top. Start with the branches 

               farthest from the pole – fan out in a star shape, and continue until 

               the entire tree is shaped.

Step 6

. When finished shaping the branches, slightly 

                   upsweep all branch tips for a uniform look.

Assembly

Assembling the tree stand

Pre-Assembly

Package Contents

Part                        Description                                Quantity

A                             Tree top                                          1
B                    Tree center, Sticker 2                           1
C                    Tree center, Sticker 1                           1
D                           Tree stand                                        1

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a.  

READ AND FOLLOW ALL 

    SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should 

always be followed, including the following:

b.  Do not use seasonal products outdoors unless marked   

  suitable for indoor and outdoor use. When products are 

  used in outdoor applications, connect the product to a 

  Ground Fault Circuit Interrupting (GFCI) outlet. If one is 

   not provided, contact a qualified electrician for proper 

  installation.

c.   This seasonal product is not intended for permanent 

  installation or use.

d.  Do not mount or place the product near gas or electric    

  heaters, fireplaces, candles, or other similar sources of 

   heat.

e.  Do not secure the wiring of the product with staples or 

  nails, or place on sharp hooks or nails.

f.   Do not let lamps rest on the supply cord or on any wire.
g.  Unplug the product when leaving the house, when  

  retiring for the night, or if left unattended.

h.  This is an electric product and not a toy! To avoid risk of 

  fire, burns, personal injury and electric shock it should not  

  be played with or placed where small children can reach it.

i.   Do not use this product for other than its intended use.
j.   Do not hang ornaments or other objects from cord, wire, 

  or light string.

k.  Do not close doors or windows on the product or exten 

  sions cords as this may damage the wire insulation.

l.   Do not cover the product with cloth, paper, or any materi

  al that is not a part of the product when in use.

m. This product is equipped with push-in type lamps. Do not  

  twist lamps.

n.  Read and follow all instructions that are on the product

      or provide with the product.

o.  

SAVE THESE INSTRUCTIONS

Eye Bolt

Tree top

Section 2

Section 1

Do Not Tamper

Internal Parts

Open the

protective

cover

Do Not Tamper

Internal Parts

Open the

protective

cover

80S

100S

100S

100S

90S

90S

90S

100S

Foot Pedal

on/off Switch

Adaptor

To Be Plugged

Into Wall

Outlet

*Electrical Rating For The Tree

  (For Indoor Use Only)

  Input:120V, 60Hz, 0.28A Max.

  Output: 29V 0.6A

Step 1.

 

Grasp the power adapter or power cord plug, and than 

                unplug from the power outlet. Do not pull the power cord.

LAMP REPLACEMENT

Step 2. Lift up lamp lock tab, then pull the 
                lamp and plastic lamp base straight 
                out of the lamp-holder.

Step 3.

 

Replace with a new spare lamp 

             provided with this product.

( Reference figure only)

USER SERVICING INSTRUCTIONS

Top view

Side view

TM

Reviews: