background image

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a.  

READ AND FOLLOW ALL 

   SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should always 

be followed, including the following:

b.  Do not use seasonal products outdoors unless marked suitable 

  for indoor and outdoor use. When products are used in outdoor 
  applications, connect the product to a Ground Fault Circuit 
 Interrupting (GFCI) outlet. If one is not provided, contact a   
 qualified electrician for proper installation.

c.   This seasonal product is not intended for permanent installa

  tion or use.

d.  Do not mount or place the product near gas or electric  heaters, 

  fireplaces, candles, or other similar sources of heat.

e.  Do not secure the wiring of the product with staples or nails, or  

 place on sharp hooks or nails.

f.   Do not let lamps rest on the supply cord or on any wire.
g.  Unplug the product when leaving the house, when retiring for 

 the night, or if left unattended.

h.  This is an electric product and not a toy! To avoid risk of fire,    

 burns, personal injury and electric shock it should not be played   
 with or placed where small children can reach it.

i.   Do not use this product for other than its intended use.
j.   Do not hang ornaments or other objects from cord, wire,  or  

 light string.

k.  Do not close doors or windows on the product or exten sions  

 cords as this may damage the wire insulation.

l.   Do not cover the product with cloth, paper, or any materi al 

  that is not a part of the product when in use.

m. This product is equipped with push-in type lamps. Do not twist   

 lamps.

n.  Read and follow all instructions that are on the product or  

 provide with the product.

o.  

SAVE THESE INSTRUCTIONS

Christmas Tree

Model: TG76M3W89D21

Sku # 1002 362 374

Step 1.

 

Grasp the power adapter or power cord plug, 

               and than unplug from the power outlet. 

               Do not pull the power cord.

LAMP REPLACEMENT

Step 2. Lift up lamp lock tab, then pull the 

               lamp and plastic lamp base 

               straight out of the lamp-holder.

Step 3.

 

Replace with a new spare lamp 

               provided with this product.

( Reference figure only)

USER SERVICING INSTRUCTIONS

Tree top

Section 2

Section 1

Do Not Tamper

Internal Parts

Open the

protective

cover

Do Not Tamper

Internal Parts

Open the

protective

cover

Control box

Adaptor

To Be Plugged

Into Wall

Outlet

Foot Pedal

on/off Switch

80S

80S

90S

90S

70S

70S

70S

Step 1

. Choose a location near a wall outlet.

Step 2

. Unfold the legs of the tree stand and lay the stand on the 

               floor.

Step 3

. Slide the locking disk of the tree stand down until it 

                    snaps into place.

    Assembling the tree
    This tree assmebles with Quick Set® technology
    ---Set up and light up your tree in less than 10 minutes!

Step 1.

 Remove the protective caps from the tree bottom and 

               insert the pole into the tree stand.

Step 2.

 Continue by inserting the upper tree section(s) to the 

               lower section(s) until inserting the tree top.

Step 3. 

Shape the branches to your preference by working from 

                the bottom to the top. When adjusting branches, ensure 

                that all wires are free of branch hinges.

Step 4.

 Insert the adaptor into the wall outlet. All your lights 

                   should now be lit.

Step 5. 

Shape the tree from the bottom to the top. Start with 

                   the branches farthest from the pole – fan out in a star      

                   shape, and continue until the entire tree is shaped.

Step 6

. When finished shaping the branches, slightly upsweep all 

               branch tips for a uniform look.

Assembly

Assembling the tree stand

Pre-Assembly

Package Contents

Part

A
B
C
D

Description

Tree top

Tree center, Sticker 2
Tree center, Sticker 1

Tree stand

Quantity

1
1
1
1

Top view

Side view

TM

Reviews: