background image

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a.  

READ AND FOLLOW ALL 

    SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should 

always be followed, including the following:

b.  Do not use seasonal products outdoors unless marked   

  suitable for indoor and outdoor use. When products are  

  used in outdoor applications, connect the product to a  

  Ground Fault Circuit Interrupting (GFCI) outlet. If one is 

  not provided, contact a qualified electrician for proper 

  installation.

c.   This seasonal product is not intended for permanent 

  installation or use.

d.  Do not mount or place the product near gas or electric 

  heaters, fireplaces, candles, or other similar sources of 

  heat.

e.  Do not secure the wiring of the product with staples or 

  nails, or place on sharp hooks or nails.

f.   Do not let lamps rest on the supply cord or on any wire.
g.  Unplug the product when leaving the house, when  

  retiring for the night, or if left unattended.

h.  This is an electric product and not a toy! To avoid risk of  

  fire, burns, personal injury and electric shock it should not  

  be played with or placed where small children can reach it.

i.   Do not use this product for other than its intended use.
j.   Do not hang ornaments or other objects from cord, wire, 

  or light string.

k.  Do not close doors or windows on the product or exten 

  sions cords as this may damage the wire insulation.

l.   Do not cover the product with cloth, paper, or any materi 

  al that is not a part of the product when in use.

m. This product is equipped with push-in type lamps. Do not 

   twist lamps.

n.  Read and follow all instructions that are on the product

      or provide with the product.

o.  

SAVE THESE INSTRUCTIONS

Step 1

. Choose a location near a wall outlet.

Step 2

. Unfold the legs of the tree stand and lay the stand 

              on the floor.

Step 3

. Slide the locking disk of the tree stand down until it 

                  snaps into place.

    Assembling the tree
    This tree assmebles with Quick Set® technology

    ---Set up and light up your tree in less than 10 minutes!

Step 1

. Remove the protective caps from the tree bottom 

                  and insert the pole into the tree stand.

Step 2

. Continue by inserting the upper tree section(s) to

                  the lower section(s) until inserting the tree top.

Step 3

. Shape the branches to your preference by working

                  from the bottom to the top. When adjusting branches,
                  ensure that all wires are free of branch hinges.

    Step 4

. Insert the adapter into the wall outlet. All your lights 

                  should now be lit.

    Step 5. 

Shape the tree from the bottom to the top. Start with 

                  the branches farthest from the pole – fan out in a star     
                  shape, and continue until the entire tree is shaped.

Step 6

. When finished shaping the branches, slightly 

                 upsweep all branch tips for a uniform look.

Assembly

Assembling the tree stand

Pre-Assembly

Package Contents

Part                        Description                                Quantity

A                              Tree top                                         1
B                     Tree center, Sticker 2                          1
C                     Tree center, Sticker 1                          1
D                           Tree stand                                        1

Christmas Tree

Model: TG76M3P08D23

Sku # 1004 044 656

Tree top

Section 2

Section 1

Control box

Adapter

To Be Plugged

Into Wall

Outlet

Foot Pedal

on/off Switch

100S

60S

50S

50S

90S

Top view

Side view

TM

Do Not Tamper
Internal Parts

Open the

protective

cap

Do Not Tamper
Internal Parts

Open the

protective

cap

NEED HELP?

DO NOT RETURN TO STORE. Call: 1-877-527-0313 

Form 8am to 5pm EST, Monday through Friday.

Reviews: