ASSEMBLY
1 Assembling the Legs to the Body
Insert the metal connecting rods attached to each Front and Hind Leg
(E,F) into the connecting holes on the underside of the Body (D).
2 Assembling the Tail to the Body and Fastening the Legs
to the Body
Fasten the Legs and Body together with Plastic Ties (L) over the metal
frame where they meet. Insert the connecting rod on the Tail (G) into the
connecting hole on the rear of the Body (D).
3 Assembling the Head/Neck to the Body
Insert the connecting rods on the bottom of the Head/Neck (B) into the
connecting holes on the front of the Body (D) then fasten together at the
connecting loops with the Plastic Ties (L).
4 Assembling the Antlers and Ears to the Head
Insert the connecting rods on both the Antlers and Ears (A,C) into the connecting
holes at the top of Head/Neck (B).
[Note: The Ears go to the outside of the Antlers]
5 Assembling the Bow Tie
Insert the connecting wires on the Bow Tie (H) through the material of the
Body (D) then twist the wires together to secure.
6 Securing the Deer to the Ground
Secure the Deer to the ground with the Ground Stakes (K) by placing a
Ground Stake over the metal frame on each Leg then into the
ground.
D
E
F
L
D
G
B
L
D
A
B
C
H
D
K
