background image

 

 

 

Safety Information

 

IMPORTANT SAFETY 
INSTRUCTIONS 
 

When using electrical products, basic precautions should always be 

followed including the following: 

a)

 

READ AND FOLLOW ALL 

SAFETY INSTRUCTIONS. 

b) Do not use seasonal products outdoors unless marked suitable for 
indoor and outdoor use. When products are used in outdoor 
applications, connect the product to a Ground Fault Circuit Interrupting 
(GFCI) outlet. If one is not provided, contact a qualified electrician for 
proper installation. 

c) This seasonal use product is not intended for permanent installation 
or use. 
d) Do not mount or place near gas or electric heaters, fireplace, candles 
or other similar sources of heat. 
e) Do not secure the wiring of the product with staples or nails, or place 

on sharp hooks or nails. 
f) Do not let lamps rest on the supply cord or on any wire. 
g) Unplug the product when leaving the house, or when retiring for the 
night, or if left unattended. 
h) This is an electric product – not a toy!  To avoid risk of fire, burns 

personal injury and electric shock it should not be played with or placed 
where small children can reach it. 
i) Do not use this product for other than its intended use.  
j) Do not hang ornaments or other objects from cord, wire, or light string. 
k) Do not close doors or windows on the product or extension cords as 

this may damage the wire insulation. 
l) Do not cover the product with cloth, paper or any material not part of 
the product when in use. 
m) This product is equipped with push-in type lamps. Do not twist 
lamps. 
n) This product employs overload protection (fuse). A blown fuse 

indicates an overload or short-circuit situation. If the fuse blows, unplug 
the product from the outlet. Also unplug any additional strings or 
products that may be attached to the product. Replace the fuse as per 
the user servicing instructions (follow product marking for proper fuse 
rating) and check the product. If the replacement fuse blows, a 

short-circuit may be present and the product should be discarded. 
o) Do not move the tree by pulling the tree tips or tree branches.

 

p) Read and follow all instructions that are on the product or provided 
with the product. 

q)

 SAVE THESE INSTRUCTIONS. 

 

Use and Care Instructions  

a)

 

When the product is placed on a live tree, the tree should be well 
maintained and fresh. Do not place on live trees in which the 

needles are brown or break off easily. Keep the tree holder filled 
with water. 

b)

 

If the product is placed on a tree, the tree should be well secured 
and stable. 

c)

 

Before using or reusing, inspect product carefully. Discard any 
products that have cut, damaged, or frayed wire insulation or cords, 

cracks in the lampholders or enclosures, loose connections, or 
exposed copper wire. 

5FT Snowfall Shimmer Fir Potted Tree 

SKU# 1006185189 

 

 

 

d)

 

When storing the product, carefully remove the product from 
wherever it is placed, including tree, branches, or bushes, to avoid 
any undue strain or stress on the product conductors, connections, 
and wires. 

e)

 

When not in use, store neatly in a cool, dry location protected from 
sunlight. 

 

Package Contents

 

 

 

A.

 

 Tree top  
Qty: 1 

B.

 

Tree bottom  
Qty: 1 

C.

 

Tree base 
Qty: 1 

D.

 

 Fuse 
Qty: 4 

 

E.

 

Replacement 
bulb  

Qty: 4 

 
 
 

 

 

 

CAUTION!

 – 

ALWAYS UNPLUG YOUR TREE 

FROM ITS POWER SOURCE BEFORE ASSEMBLING OR 
DISASSEMBLING.

 

Assembling the tree

 

Please remove protective covers from the base of the pole for each tree 

section before assembling. 

Step 1. Carefully insert bottom section (B) of tree into tree base.  (See Fig. 

1) 

Step 2. Insert the top section (A) into the bottom section (B).  (See Fig. 2) 

Step 3. Connect the plug of top section (A) with the end connector of the 

bottom section (B) according to the magnified drawing.  (See Fig. 
3) 

Step 4.  Gently pull branches up and out. When adjusting branches be sure 

that all wires are free of branch hinges.  (See Fig. 4) 

Step 5.  Shape the branches.  Starting with tips closest to the pole, shape 

one tip to the right, one to the left and one at the center of the main 
stem.  Repeat pattern for each branch.  (See Fig. 5) 

Step 6. Plug the power cord from the bottom section (B) into a proper 

outlet.   

Pre-Assembly 

Assembly

 

Reviews: