Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
a)
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS.
b) This product is for indoor use only. The electrical rating 2.72 A 120 V 60
Hz.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplace, candles or
other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or if
left unattended.
h) This is an electric product – not a toy! To avoid risk of fire, burns personal
injury and electric shock it should not be played with or placed where small
children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this
may damage the wire insulation.
I) Do not cover the product with cloth, paper or any material not part of the
product when in use.
m) This product employs overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse blows, unplug the product
from the outlet. Also unplug any additional strings or products that may be
attached to the product. Replace the fuse as per the User Servicing
Instructions (following product marking for proper fuse rating) and check the
product. If the replacement fuse blows, a short-circuit may be present and the
product should be discarded.
n) This product is equipped with push-in type lamps. Do not twist lamps.
o) This product has a polarized plug (one blade is wider than the other) as a
feature to reduce the risk of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not use with an
extension cord unless plug can fully inserted. Do not alter or replace the plug.
p) Read and follow all instructions that are on the product or provided with the
product.
q)
SAVE THESE INSTRUCTIONS.
CAUTION! – ALWAYS UNPLUG YOUR
TREE FROM ITS POWER SOURCE
BEFORE ASSEMBLING OR
DISASSEMBLING.
CAUTION! –
ALWAYS UNPLUG YOUR TREE FROM ITS
POWER SOURCE BEFORE ATTEMPTING FUSE AND BULB
REPLACEMENT.
9 ft Noble Fir Quick-Set Artificial Christmas Tree
with 800 Clear Lights
SKU# 1001302147
Package Contents
A.
Top Section
Qty: 1
B.
Upper
Middle
Section
Qty: 1
C.
Lower
Middle
Section
Qty: 1
D.
Bottom Section
Qty: 1
E.
Stand with an
eye bolt
Qty: 1
F.
Power Cord
Qty: 1
G.
Replacement bulb
Qty: 16
H.
Fuse
Qty: 2
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Open the stand to a 90 degree angle until the hole lines up with the
hole on the tube.
Step 3. Screw an eye bolt into the hole.
Pre-Assembly
