Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
a)
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b) This product is for indoor use only. The electrical rating 1.7 A 120 V 60
Hz.
c) This seasonal use product is not intended for permanent installation or
use.
d) Do not mount or place near gas or electric heaters, fireplace, candles or
other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night,
or if left unattended.
h) This is an electric product – not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this
may damage the wire insulation.
I) Do not cover the product with cloth, paper or any material not part of the
product when in use.
m) This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows, unplug
the product from the outlet. Also unplug any additional strings or products
that may be attached to the product. Replace the fuse as per the User
Servicing Instructions (following product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit may
be present and the product should be discarded.
n) This product is equipped with push-in type lamps. Do not twist lamps.
o) This product has a polarized plug (one blade is wider than the other) as
a feature to reduce the risk of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not use with
an extension cord unless plug can fully inserted. Do not alter or replace
the plug.
p) Read and follow all instructions that are on the product or provided with
the product.
q)
SAVE THESE INSTRUCTIONS.
CAUTION! – ALWAYS UNPLUG YOUR
TREE FROM ITS POWER SOURCE
BEFORE ASSEMBLING OR
DISASSEMBLING.
7 ft Noble Fir Quick-Set Artificial Christmas tree
with 500 Clear Lights
SKU# 1001302145
Package Contents
A.
Tree top
Qty: 1
B.
Tree center
Qty: 1
C.
Tree bottom
Qty: 1
D.
Stand with an eye
bolt
Qty: 1
E.
Power cord
Qty: 1
F.
Replacement bulb
Qty: 10
G. Fuse Qty: 1
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Open the stand to a 90 degree angle until the hole lines up with the
hole on the tube.
Step 3. Screw an eye bolt into the hole.
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
Step 1. Insert tree bottom (C) into the tree stand (D) and tighten the screw.
(See Fig. 1)
Step 2. Insert tree center (B) into the tree bottom (C). (See Fig. 2)
Step 3 Insert the tree top (A) into the tree center (B). (See Fig. 3)
Step 4. Remove the plastic protective cover on the plug fixed on the
pole of the bottom section (C). Insert the plug into the end
connector of the power supply cord with an on/off foot pedal
switch according to the magnified drawing on Fig. 4.
Pre-Assembly
