background image

CONGRATULATIONS!

You’ve purchased an oven from North America’s oldest manufacturer of wood burning products.

By cooking with wood you’re helping to CONSERVE ENERGY!

Wood is our only Renewable Energy Resource. Please do your part to preserve our wood 

supply. Plant at least one tree each year. Future generations will thank you.

The instructions pertaining to the installation of your wood burring oven comply with NFPA 211.

CAUTIONS:

HOT WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. 

CONTACT MAY CAUSE SKIN BURNS.

DO NOT USE CHEMICALS OR FLUIDS TO IGNITE THE FIRE.

DO NOT LEAVE THE OVEN UNATTENDED WHEN THE DOOR IS SLIGHTLY OPENED.
DO NOT BURN GARBAGE, FLAMMABLE FLUID SUCH AS GASOLINE, NAPHTHA 

OR MOTOR OIL.

ALWAYS CLOSE THE DOOR AFTER THE IGNITION.

THIS MODEL NOT APPROVED FOR MANUFACTURED OR MOBILE HOME 

INSTALLATION.

Combustible :

Wood

Colors :

Metallic Black

Flue Pipe Diameter :

6” (15.3cm)

Flue Pipe Type: (Standard Single Wall or Double Wall):

Black or Blued Steel 2100°F (650°C)

Minimum Chimney Height :

12’ (3.7m)

Maximum Log Length :

16

Dimensions
Overall :
Depth x Width x Height :

24.5 x 28.0 x 52.3

Combustion Chamber :
Width x Depth :

19.7 x 14.5

Combustion Chamber Volume :
Cubic Feet:

1.66

Door Opening : Width x Height:

15.9 x 10.0

Cooking Chamber :
Width x Depth :

17.35 x 13.8

Cooking Chamber Volume :
Cubic Feet:

2.0

Cooking Door Opening : Width x Height:

18.75 x 11.75

Pyroceramic Glass Door : (Viewing) Width x Height:

16.24 x 9.75

Weight (lbs):

425 lbs

Summary of Contents for PW100A


























Reviews: