HOMCOM A91-181, Assembly & Instruction Manual

Page: 13 / 17

3.Now connect the rear support tube (1) with the screw (18), two washers (20) and the
Screw nut (24) on the front support tube. Finally, you still push the locking pin (23) by the
underlying holes of the two parts.
4. Attach the bracket to the leg clamp (4) on the front support tube (2) with the Adapter
plate (10) and the screws (18), washers (20) and the nuts (24).
5. Plug the tube (7) into the hole on the bracket for the leg fixation (4) and insert a Foam
roller (12) on each side of the tube (7).
6.Insert if not already assembled, the plastic cover (27) into the end of the front support
tube (2). Slide the adjustable support tube (3) into the front support tube. Attach these to
the Screw (14) and the bolt (15).
13