HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Strana 36
Sloupová vrtačka / DRILL PRESS SB2516H
13.2
Adjustment
MT3 arbor and drill chuck need to be clean.
Plunge the chuck jaws of the drill chuck entirely.
Connect the arbour and drill chuck with care!
Fix it by softly knocking on it with a wooden or rubber hammer (never use a metal hammer).
Now insert the combo into the spindle and twist until it
clicks.
Fix it by softly knocking on it with a wooden or rubber
hammer.
You can remove
the combo with
the
morse
shank puller.
MT3
Summary of Contents for SB2516H
Page 52: ......
