Holzmann BTS 75-2, User Manual

Page: 19 / 35

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 19
BTS 75-2
11.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
 Keep your work area dry and tidy! An untidy work area may cause
accidents. Avoid slippery floor.
 Make sure the work area is lighted sufficiently
 Work only in a well ventilated area
 Do not overload the machine
 Provide good stability and keep balance all times
 Avoid abnormal working postures! Make sure you stand squarely and
keep balance at all times.
 Keep away from the running abrasives!
 Always stay focused when working. Reduce distortion sources in your
working environment. The operation of the machine when being tired, as
well as under the influence of alcohol, drugs or concentration influencing
medicaments is forbidden.
 Respectively trained people only and only one person shall operate the
machine.
 Do not allow other people, particularly children, to touch the machine or
the cable. Keep them away from your work area.
 Make your workshop childproof.
 Make sure there is nobody present in the dangerous area. The minimum
safety distance is 2m
 Keep any machine that is not being used out of reach of children
 Wear suitable work clothes! Do not wear loose clothing or jewelry as
they might be caught and cause severe accidents!
 Wear a hair net if you have long hair.
 Loose objects can become entangled and cause serious injuries!

 Use personal safety equipment: ear protectors, safety goggles, work
wear, dust mask when working with or on the machine.
 Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the
machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch