HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Strana 36
TALÍŘOVÁ A PÁSOVÁ BRUSKA / BELT AND DISC SANDER BT 46ECO
14.4
Tips for sanding
14.4.1
Surface sanding on sanding belt
For surface sanding, press the workpiece gently with both hands against the sanding belt and the
safety fence. To achieve a better sanding result, you can move the workpiece gently back and
forth.
14.4.2
End sanding on sanding belt
For end sanding, bring the sanding aggregate in vertical position and mount the worktable. Hold
the workpiece firmly with both hands and press it gently against the sanding belt. Therefore move
the workpiece gently back and forth.
14.4.3
Sanding curved edges
For sanding curves, hold the workpiece firmly with both hands and exert slight pressure on the
sanding belt. Grinding internal rounding only at the front deflection roller.
14.4.4
Round parts with sanding disc
For sanding round parts, hold the workpiece firmly with both hands and exert slight pressure only
on the left, down running side (otherwise there is a risk of thrown workpieces) of the sanding
disc.
14.4.5
End sanding and mitre sanding with sanding disc
For end sanding and mitre sanding use the mitre auger and work like the capture before.
14.4.6
Dustextraction
The connecting stub for the dustextration is below the table.
Summary of Contents for BT 46ECO
Page 63: ......
