HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Strana 39
PÁSOVÁ PILA / WOOD BANDSAW HBS 230HQ
16.3.2
Adjust the lower saw band guide
The lower blade guide must be readjusted after each band saw blade change or tracking
adjustment.
Through the hole
B
and
E
, use hex wrench to
loosen socket bolts, adjust guide pin holder D and
thrust bearing
C
just like adjusting upper blade
guide.
Loosen the set screw
A
, and adjust the guide pin
to a position 0.5mm away from blade. Retighten
the set screw.
17
OPERATION
17.1
Start / Stop
To turn ON or OFF the machine, press the main switch
To use LED-light, turn ON the light switch.
17.1.1
Miter gauge
To use the miter gauge fence, slide it into the slot
provided.
To adjust the angle of the miter cut, loosen lock,
move the miter gauge to the desired position (60 °)
and fix him afterwards.
Main switch
LED light switch
Miter gauge
Lock knob
Summary of Contents for HBS 230HQ
Page 56: ......
