HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
Strana 28
D 510F
11.3.1
Faceplate
Place the fork wrench (
2
) behind the face plate (
1
). Fix the drive shaft
to the fixation rod (
3
) and solve or fix the faceplate with the spanner.
W A R N I N G
Check before
each use of the
machine
the tightness of the
face plate
!
11.3.2
Insert 4-zag driver
Driving in the 4-zag carrier (
9
) in the hole in the spindle
taper with momentum until it is firmly seated.
The 4-zag carrier is by inserting the fixing bar (
A
) on
left headstock released.
11.3.3
tail stock
Slide the Live center with momentum in the
tailstock spindle.
With the handwheel can the tailstock spindle be
placed in the desired position.
Tailstock spindle can be fix or solve with the
clamping lever
The Live center is to turn back the tailstock spindle to the far right back out of the quill down.
fixing lever
9
Spindle
A
Summary of Contents for D 510F
Page 45: ......