TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
24
BSG13PRO & BSG26PRO
6.
Mount the new grinding wheel in reverse order - see
illustration on the left.
15.3
Storage
N O T I C E
Improper storage can damage and destroy important components. Only store packed
or unpacked parts under the intended environmental conditions
!
When not in use, store the machine in a dry, frost-proof and lockable place to prevent the
formation of rust on the one hand and to ensure that unauthorised persons and in particular
children have no access to the machine on the other hand.
15.4
Disposal
Observe the national waste disposal regulations. Never dispose of the machine,
machine components or equipment in residual waste. If necessary, contact your
local authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer,
he is obliged in certain countries to dispose of your old machine properly.
16
TROUBLESHOOTING
W A R N I N G
Danger due to electrical voltage! Manipulating the machine with the power supply
up may result in serious injury or death. Before carrying out any troubleshooting
work, always disconnect the machine from the power supply and secure it against
unintentional recommissioning!
Many possible sources of error can be excluded in advance if the machine is properly connected
to the mains.
If you are unable to carry out necessary repairs properly and/or do not have the required
training, always consult a specialist to solve the problem.
Fault
Possible Cause
Remedy
Machine cannot be switched
on
Mains plug is not plugged in
Plug in the mains plug
O
N
-O
FF
-switch is defective
Contact the Customer Service
Center
Poor grinding performance
Grinding wheel is worn out
Replace grinding wheel
