HOLZMANN MASCHINEN BBS550SMART, User Manual

Page: 43 / 55

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Strana 43
BBS550Smart
18.2.5 Changing the blade
▪
Loosen screws and remove the guides.
▪
Reduce the blade tension and remove
the blade.
▪
Insert the new blade and re-assemble
the guides.
▪
Adjust the required blade tension as
described above.
18.2.1 Changing the V-Belt
▪
Loosen screws on the motor.
▪
Reduce belt tension with the screws.
▪
Renew the belts.
▪
Adjust the correct belt tension again.
18.2.2 Maintenance plan
Wear of machine depends strongly on operation condition. The following intervals are valid when
using the machine within the operation limits.
Intervall component activity
For each usage
Band wheel bearing Check for wear and if necessary replace it
Blade guide bearing Check for wear and if necessary replace it
Log screws Grease threads