HOLZMANN MASCHINEN BBS550SMART, User Manual

Page: 42 / 55

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Strana 42
BBS550Smart
18.2.3 Adjusting blade guidance
Adjust rolls of the blade guide in a way that
there is a gap between rolls and blade of a
paper width.
To do this, loosen the screws and adjust the
rolls, then tighten the screws again.
18.2.4 Adjusting blade tension
Proper blade tension is achieved if the blade
defects no more than 3-6 cm when it is firmly
moved by hand at the center location of the
blade.
To increase blade tension rotate the lever for
the sawblade tension clockwise.
N O T I C E
Make sure the tracking adjustment
bolt is sitting in recess. See Picture.