HOLZMANN MASCHINEN ABS 1500FF, User Manual

Page: 28 / 37

TROUBLE SHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 28
ABS1500FF
16.2 Cleaning
After each workshift the machine has to be cleaned. Remove chips etc. with a suitable tool. Do
not remove them by hand (cutting injury!). Remove dust as well.
NOTICE
The usage of certain solutions containing ingredients damaging metal surfaces as
well as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
16.3 Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old.
17 TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble Possible cause Solution
The magnetic support has no
magnetic force
 Switch defective  Repair switch
 Power supply is off  Repair power supply
 Fuse is defectivet  Change fuse
 Electric contactor is defective  Repair or change electric
contactor
Dust emerges from  Leaking or blocked connections  Check connection
 Remove blockages
 Dust bag or filter is defective or
incorrectly installed
 Check bag and filter
 Change defective bag/filter
Loud noise in the fan wheel
housing
 Extracting of a big part  Switch of the machine,
disconnect the machine and
remove the part
 Loosen fan wheel  Tighten the fan wheel
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE EXPERTLY CONNECTION
TO THE ELECTRICITY GRID.
NOTICE
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the
problem.